サーバーと仮想マシンのバックアップ設定
本項では、環境内のサーバーと仮想マシンのバックアップを開始するために必要な手順について説明します。
仮想マシンのバックアップ
Phoenixを設定して仮想マシン環境をバックアップするには、以下の手順を実行します。
手順番号 | 手順 | 説明 |
---|---|---|
VMware環境の準備 | ||
1 |
PhoenixをVMware ESXiまたはVMware vCenter Serverのどちらで設定するか決める |
Phoenixの設定は以下から選択できます。
|
2 |
VMware環境がバックアッププロキシのデプロイに必要なリソースがあることを確認する |
バックアッププロキシはOVF仮想アプライアンス内にCentOSインストーラーとともにバンドルされています。このアプライアンスをデプロイするとき、新しいCentOSのVMがバックアッププロキシのインストールとともに作成されます。 想定通りに動作するようバックアッププロキシを有効にするため、バックアッププロキシに必要な最小限のリソースが割り当てられているなど、環境を確認してください。 詳細はPrerequisites for setting up Phoenix for VMwareを参照してください。 |
3 |
十分なストレージがあることを確認する |
データのニーズに応じて、Druvaサポートチームが設定用のストレージを作成し、割り当てます。追加ストレージを要求するには、Druvaサポートチームまでお問い合わせください。または、営業担当にご連絡ください。 |
4 |
最初に、招待メールで受け取った認証情報を使用してPhoenixマスター管理コンソールへログインしてください。
|
|
VMware環境のバックアップ準備 | ||
5 |
VM全体でバックアップを有効にするには、ESXiハイパーバイザーまたはvCenter Server上で1つまたは複数のバックアッププロキシのインスタンスをデプロイする必要があります。特定ホスト上で作成されたVMか、すべてのホストのVMかどちらでバックアップを有効にするかによって異なります。その後、バックアッププロキシを登録し、設定する必要があります。登録時に、Phoenixはアクティベーショントークンを作成します。設定時に、バックアッププロキシをアクティベートするためにこのトークンを使用します。 |
|
6 |
バックアッププロキシをアクティベートすると、アクティベートされたVMはVMware Setupsページ上のAll Virtual Machines配下に表示されます。自動バックアップのスケジュールを作成するため、仮想マシンを設定します。 |
MS-SQLサーバーのバックアップ
初期設定の完了後、バックアップ対象のSQLサーバーを構成できます。初期設定には以下が含まれます。
- Creating/selecting an organization: Phoenixでは、組織はバックアップとリストア用にサーバーを構成するアクセスベースの制御メカニズムです。組織は、サーバー、バックアップポリシー、保存ポリシーなどのエンティティの論理パーティションを作成します。Phoenixにはサーバーを選択して登録できるデフォルトの組織 (Default Organization) があります。
- Creating administrators: 管理者はサーバーの登録と構成を制御してバックアップとリストアを行うユーザーです。
初期設定の完了後、以下の手順でMS-SQLサーバーにより作成および管理されたデータベースをPhoenixにバックアップさせます。
手順番号 | 手順 | 説明 |
---|---|---|
SQLサーバーのバックアップ準備 | ||
1 | Phoenix管理コンソールにログインし、サーバーを登録する組織を選択する | Phoenix管理コンソールから、SQLサーバーを登録する組織を選択します。 選択した組織のServersタブで Register New Server オプションを使用してPhoenixエージェントをダウンロードし、アクティベーショントークンを生成します。 |
バックアップ対象SQLサーバーの登録と構成 | ||
2 | サーバーを登録する | Go through the prerequisites, install the Phoenix agent on the system that hosts SQL server instance(s), and activate the agent using the activation token. When you activate your agent, you provide a server name for the system on which the agent is installed. Your system is registered with the server name you provide. To see your server, log on to Phoenix management console, select your organization and then click Servers. You can see your server under the Registered tab. |
3 | サーバーをバックアップ対象に構成する | Select your server, and attach it to a server group. Backup and retention policies specified for the server group are applied to your server. You can:
Backup policies specify the backup content, backup schedule which defines when a backup job should get triggered, and the bandwidth available to the agent to execute a job. |
データベースのバックアップ | ||
4 | エージェントがバックアップポリシーに従ってバックアップを開始 | Phoenix agent triggers a backup job based on the schedule you specify in the backup policy. When a full or differential backup job is triggered, Phoenix backs up the selected database, and its snapshot is created. When a log backup is triggered, transaction log of the database is backed up. |
データベースのリストア | ||
5 | Phoenix管理コンソールからリストアを開始 | When you require a recovery, you trigger a restore job from the Phoenix management console. Phoenix lets you perform the following restore jobs: |
ファイルサーバーのバックアップ
The following diagram depicts the steps to set up Phoenix to back up files and folders.
The following table summarizes the steps to setup Phoenix to back up your File servers.
Task Number | Task | Description |
---|---|---|
Get ready to prepare your File servers for backup | ||
1 | Ensure that you have adequate storage | Depending on your data needs, the Druva Support team creates and assigns storage. To request for additional storage, write to the Druva Support team (support@druva.com). Alternatively, get in touch with your account executive. |
2 | Log on to Phoenix Management Console |
To begin, log on to Phoenix Management Console with the credentials that you received in the invitation email.
|
Prepare your File servers for backup | ||
3 | Register a new server |
To establish a connection between your servers and Phoenix Cloud, register the servers. At the time of registration, Phoenix generates an activation token. Use this token to activate Phoenix agents that are installed on your servers. |
4 | Prerequisites for File Server | The prerequisites for installing Phoenix agent. |
5 |
Install Phoenix agent on the servers that you want to back up. Thereafter, activate the agents to establish a connection between Phoenix Cloud and all agent instances. Use the token that Phoenix generated at the time of registering servers. |
|
6 | Configure file servers |
After activating Phoenix agents, the activated servers appear as registered servers under Manage > Servers. Configure these servers to ensure their readiness for backup. |